Fossil Focus: Heterostraci

Volume 3 | Article 11 | Page 1-9 image_pdf Download

by Joseph N. Keating*1

Introduction:

The Heterostraci (which means ‘different shield’) make up an extinct group of jawless fish that lived during the early to middle Palaeozoic era, approximately 440 million to 359 million years ago. They were exceptionally diverse, with over 300 species currently described from marine and freshwater sediments of North America, Europe and Siberia­­­. Heterostracans are characterized by their external armour of distinct plates, which are composed mainly of bone and dentine (a hard-tissue component of teeth in vertebrates). Most heterostracans can be classified into two major groups, the cyathaspids and the pteraspids, which differ with respect to the structure, number and arrangement of their armoured plates. Heterostracan fossils are rarely found as complete skeletons and more commonly occur as isolated plates (Fig. 1). It is therefore unsurprising that when the first heterostracan fossils were discovered, their identity was not immediately recognized, and they were incorrectly classified as the shells of molluscs or crustaceans. Eventually, in 1858, the famous English biologist Thomas Henry Huxley examined the microscopic structure of heterostracan fossils and confirmed that they belonged to a previously unknown extinct group of vertebrates. More than 150 years later, these curious fossils continue to inform our understanding of vertebrate ecology, distribution and evolution during the Palaeozoic era.

Figure 1 — An isolated lower plate of the pteraspid heterostracan Belgicaspis crouchi, displaying beautiful ornamentation. Photograph courtesy of Simon Powell.
Figure 1 — An isolated lower plate of the pteraspid heterostracan Belgicaspis crouchi, displaying beautiful ornamentation. Photograph courtesy of Simon Powell.

Anatomy:

General morphology

The most striking feature of heterostracans is the head, which is completely enclosed in large armoured plates. The head armour is usually fusiform (wide in the middle and tapering at both ends), although in some species it is long and thin or flattened. The eye sockets are normally small and positioned towards the front of the head. Heterostraci have a single pair of external gill openings. The mouth opening is usually quite small and is covered by delicate oral plates (Fig. 2E). The pineal organ (a small endocrine gland in the brain) is covered by a thin mineralized window on top of the head, directly between the eye sockets. The head armour is divided into upper (dorsal), side (lateral) and lower (ventral) regions, which show variation in both the number and arrangement of their composite plates. This variation provides the basis for heterostracan classification. In the pteraspids, the dorsal region is subdivided into the dorsal disc, orbital plates, pineal plate and rostral plate (Fig. 2A–C). Laterally, the pteraspids have branchial plates covering the gills and cornual plates behind the external gill opening. The ventral region comprises a single ventral disc. The head armour in cyathaspids is less complex than in the pteraspids, consisting of a single large dorsal plate, a pair of branchial plates and a ventral plate (Fig. 2D).

Figure 2 — Heterostracans showing different arrangements of armoured plates. A–C, Typical pteraspid heterostracan (Errivaspis) viewed from the side (A), top (B) and bottom (C). D, Typical cyathaspid heterostracan (Anglaspis) in side view. E, Detail of the oral plates of Protopteraspis. Annotations: 1, rostral plate; 2, orbital plate; 3, dorsal disc; 4, dorsal spine; 5, dorsal ridge scales; 6, tail; 7, oral plates; 8, ventral shield; 9, branchial plate; 10, gill opening; 11, cornual plate; 12, ventral ridge plates; 13, pineal plate; 14, dorsal shield; 15, sub-orbital plate. Reproduced from: Janvier 1996 (A), Blieck 1984 (B–C), Dineley & Metcalf 1999 (D) and Purnell 2002 (E).
Figure 2 — Heterostracans showing different arrangements of armoured plates. A–C, Typical pteraspid heterostracan (Errivaspis) viewed from the side (A), top (B) and bottom (C). D, Typical cyathaspid heterostracan (Anglaspis) in side view. E, Detail of the oral plates of Protopteraspis. Annotations: 1, rostral plate; 2, orbital plate; 3, dorsal disc; 4, dorsal spine; 5, dorsal ridge scales; 6, tail; 7, oral plates; 8, ventral shield; 9, branchial plate; 10, gill opening; 11, cornual plate; 12, ventral ridge plates; 13, pineal plate; 14, dorsal shield; 15, sub-orbital plate. Reproduced from: Janvier 1996 (A), Blieck 1984 (B–C), Dineley & Metcalf 1999 (D) and Purnell 2002 (E).

In contrast to the head, with its massive armoured plates, the body and tail of heterostracans are covered in small scales. The tail is more or less paddle-shaped. Heterostracans do not have dorsal or anal fins, or pectoral or pelvic appendages. They are generally 10–30 centimetres long, although some psammosteid heterostracans grew to more than 1.5 metres.

Dermal skeleton

Many vertebrates have a bony layer of scales or plates called the dermal skeleton, which develops in the skin from a particular group of cells. The heterostracan dermal skeleton consists of three distinct layers (Fig. 3). The top layer is made of small nodules or rows that, like the teeth of living vertebrates, are primarily made of dentine with a thin cap of hard tissue similar to enamel. The dentine is perforated by microscopic tubes, which housed the cell processes of odontoblasts (the cells responsible for dentine formation) in life. These tubes branch from numerous pulp cavities that housed odontoblast cell bodies. The tooth-like structures are typically arranged in a concentric pattern and are thought to indicate previous growth stages of the armoured plates, much like the growth lines in tree trunks.

The middle layer is characterized by large blood-vessel-housing chambers called cancellae that are enclosed by ‘trabeculae’, or separating walls made of thin concentric layers of bone. Unlike the bone tissue of most living vertebrate groups, heterostracan bone seems to have no cell spaces. Furthermore, it is often penetrated by minute radiating tubes and spindle-shaped spaces that have been interpreted as having housed fibres of collagen protein (an important organic constituent of bone). This unique tissue type has been named aspidin.

The bottom layer has a structure similar to plywood, being made up of thin sheets of aspidin. It is penetrated by ascending tubes, or canals, that housed blood vessels connecting the middle layer with the rest of the body.

Figure 3 — The microstructure of the dermal skeleton of the Heterostraci. A, Generalized block diagram of pteraspid dermal bone. Reproduced from: Halstead 1973. B, The dermal skeleton of a cyathaspid. Reproduced from: Gross 1961. C, Three-dimensional computer model of a pteraspid body scale produced using synchrotron X-ray imaging. Annotations: 1, top layer; 2, middle layer; 3, bottom layer; 4, trabeculae; 5, ascending canal housing blood vessels; 6, dentine tubes housing odontoblast cell processes; 7, pulp cavity housing odontoblast cell bodies.
Figure 3 — The microstructure of the dermal skeleton of the Heterostraci. A, Generalized block diagram of pteraspid dermal bone. Reproduced from: Halstead 1973. B, The dermal skeleton of a cyathaspid. Reproduced from: Gross 1961. C, Three-dimensional computer model of a pteraspid body scale produced using synchrotron X-ray imaging. Annotations: 1, top layer; 2, middle layer; 3, bottom layer; 4, trabeculae; 5, ascending canal housing blood vessels; 6, dentine tubes housing odontoblast cell processes; 7, pulp cavity housing odontoblast cell bodies.

Internal anatomy

The internal anatomy of the Heterostraci is known mostly from internal casts, which provide impressions of the inside surface of the head armour. This evidence suggests that the heterostraci had two distinct vertical semi-circular canals in the inner ear, which are important for sensing rotation. The brain was small and elongated. The eyeballs were small and slightly conical. The olfactory system, which provides vertebrates with a sense of smell, was paired and relatively large. This is similar to the olfactory system of living jawed vertebrates, which possess paired nasal sacs, and rather unlike the single nasal sac present in living jawless lampreys. The gill apparatus is often preserved as a series of 8–10 furrows next to a series of small impressions.

Evolutionary relationships:

Heterostracans represent a clade, or natural group, of vertebrates (Fig. 4) which are characterized by possessing a single pair of external gill openings. They are jawless, like the living hagfish and lampreys, but are actually more closely related to living jawed vertebrates, with which they share a number of characteristics, including a mineralized skeleton and a paired olfactory system. Heterostracans are among the most primitive known vertebrates with an extensive mineralized skeleton. As such, the fossils provide an invaluable insight into the evolution of the vertebrate skeleton.

Figure 4 — Evolutionary tree of heterostracans. A, Tesseraspis; B, Lepidaspis; C, Drepanaspis; D, Errivaspis; E, Rhinopteraspis; F, Doryaspis; G, Eglonaspis; H, Ctenaspis; I, Torpedaspis; J, Anglaspis. Reproduced from: Halstead 1973 (A, G, H), Janvier 1996 (B, D, E, I), Blieck 1984 (C, F) and Dineley & Metcalf 1999 (J).
Figure 4 — Evolutionary tree of heterostracans. A, Tesseraspis; B, Lepidaspis; C, Drepanaspis; D, Errivaspis; E, Rhinopteraspis; F, Doryaspis; G, Eglonaspis; H, Ctenaspis; I, Torpedaspis; J, Anglaspis. Reproduced from: Halstead 1973 (A, G, H), Janvier 1996 (B, D, E, I), Blieck 1984 (C, F) and Dineley & Metcalf 1999 (J).

Most heterostracans belong to one of two major groups: the Cyathaspidiformes or the Pteraspidiformes. The Pteraspidiformes include the pteraspids and the protopteraspids. The pteraspids are best represented by forms such as Errivaspis (Fig. 2A–C, Fig. 5C), but also include more extreme forms such as Rhinopteraspis (Fig. 5A), in which the head armour is long and torpedo-shaped. Perhaps the strangest group of pteraspids is the psammosteids (Figs. 4C, 6). These wonderful animals can be recognized by their flattened, pancake-like heads. The plates are similar in shape and arrangement to those of most pteraspids, however they are separated by a mosaic of small tessellating scales. Psammosteids could grow to more than 1.5 metres and survived long after most other heterostracan species had died out. The protopteraspids include strange animals such as Doryaspis (Fig. 5B), in which the cornual plates are wing-like and the middle oral plate is strongly elongated into a protrusion at the front of the organism. Recent work has suggested that the protopteraspids form a grade of primitive Pteraspidiformes, rather than a natural group in their own right.

Figure 5 — Pteraspidiform heterostracan fossils from the collections of the Natural History Museum, London. A, Upper view of the elongated large head armour of Rhinopteraspis from the Early Devonian of Germany. B, Complete specimen of Doryaspis from the Early Devonian of Spitsbergen, Norway, showing its characteristic wing-like cornual plates and sword-like middle oral plate. C, Beautifully preserved complete specimen of Errivaspis from the Early Devonian of Herefordshire, UK.
Figure 5 — Pteraspidiform heterostracan fossils from the collections of the Natural History Museum, London. A, Upper view of the elongated large head armour of Rhinopteraspis from the Early Devonian of Germany. B, Complete specimen of Doryaspis from the Early Devonian of Spitsbergen, Norway, showing its characteristic wing-like cornual plates and sword-like middle oral plate. C, Beautifully preserved complete specimen of Errivaspis from the Early Devonian of Herefordshire, UK.
Figure 6 — Cast of an enormous dorsal disc from the psammosteid heterostracan Obruchevia, one of the largest and last surviving heterostracans.
Figure 6 — Cast of an enormous dorsal disc from the psammosteid heterostracan Obruchevia, one of the largest and last surviving heterostracans.

The Cyathaspidiformes include cyathaspids and the specialized Siberian amphiaspid heterostracans (Fig. 7). Cyathaspids are best represented by Anglaspis (Fig. 2D), but also include more peculiar forms, such as the cigar-shaped Torpedaspis. Amphiaspid heterostracans have a single fused, flattened head shield. In some species, the front part of this shovel-like head armour is elongated into a tube. Other amphiaspid species have openings at the back of the head shield, which have been interpreted as spiracles used for breathing. It has been suggested that amphiaspids may have lived half-buried in the sediment on the sea floor, much like modern rays.

Figure 7 — An isolated dorsal plate of the cyathaspid heterostracan Poraspis from Ukraine. Scale bar = 1 cm. Photograph courtesy of Simon Powell.
Figure 7 — An isolated dorsal plate of the cyathaspid heterostracan Poraspis from Ukraine. Scale bar = 1 cm. Photograph courtesy of Simon Powell.

There are a number of heterostracan species that do not easily fit into the groups mentioned above. Among these are the tessellate heterostracans such as Tesseraspis, Kallostrakon and Lepidaspis. These animals are similar in form and structure to more typical heterostracans, but their head armour is made of individual small tessellating plates, much like those of another early armoured fish, Astraspis. Because of this, they have been interpreted as the most primitive heterostracans. Other species, including Tolypelepis and Corvaspis, resemble the cyathaspids in having a single dorsal and ventral shield; however, the shields show a pattern of tooth-like ridges that makes them look as if they are composed of many separate scales. The relationship of these species to the Cyathaspidiformes and Pteraspidiformes is currently poorly understood.

Biogeography:

In addition to telling us about the anatomy and evolution of this extinct group, heterostracan fossils also provide important information about the configuration of the continents during the Early Devonian (around 419 million to 393 million years ago). Heterostracan fossils are restricted to the present-day Northern Hemisphere including parts of the United States, Europe, the Canadian Arctic and Siberia. The cyathaspids, in particular, are widely distributed across Europe, the Canadian Arctic and the United States. This is not surprising, considering that these landmasses were close to each other during the Early Devonian, as part of the supercontinent of Euramerica (Fig. 8). By contrast, the Pteraspidiformes can be subdivided into three major regional faunas: one in northwestern Euramerica (present-day western United States, the Canadian Arctic and Spitsbergen), one restricted to the western United States and one in southeastern Euramerica (present-day eastern United States and Europe). The shovel-headed amphiaspids are found only in Siberia. The distribution of heterostracans and other fossil groups, combined with geological evidence, suggest that during the Early Devonian, Siberia was a separate continent neighbouring Euamerica.

Figure 8 — Reconstruction of the geography of the Early Devonian, showing four major heterostracan faunas. Modified from: Cocks and Torsvik 2002 and Blieck et al. 2002.
Figure 8 — Reconstruction of the geography of the Early Devonian, showing four major heterostracan faunas. Modified from: Cocks and Torsvik 2002 and Blieck et al. 2002.

Ecology:

The oral plates of heterostracans are quite unlike any structure in living vertebrates. Numerous hypotheses have been put forward to explain what heterostracans ate, and how they ate it. One suggestion is that the oral plates functioned as a scoop for digging through the sediment. Another is that the oral plates were used as a filtration system for feeding on microscopic organisms. If this was the case, then heterostracans might have used suction to capture small invertebrates buried in the sediment; alternatively, the oral plates may have been used to filter microscopic organisms, such as plankton, that were suspended in the water. The oral plates have also been compared directly to teeth and it has been suggested that they functioned as biting, grasping, shearing or scraping structures used to feed on larger prey animals (such as arthropods). Unfortunately, there is little evidence to support any of these hypotheses. In fact, our current understanding of heterostracan biology contradicts some of the proposed feeding methods. For instance, without jaws it is unclear how heterostracans would have produced sufficient suction to capture microorganisms.

One technique we can use to test these hypotheses is to examine the microscopic patterns of wear on the oral plates. Each of the proposed feeding methods should produce a different pattern of wear; for instance, if the oral plates were used as a scoop, we would expect the plates to show heavy scratching and damage. A study by palaeontologist Mark Purnell at the University of Leicester, UK, showed that oral plates in a variety of heterostracan species are pristinely preserved, with little evidence of wear. Furthermore, these plates are covered with tiny delicate barbs that would have been destroyed if the oral plates had been used to bite or scrape in life. Microscopic evidence therefore effectively falsifies all but one feeding hypothesis: that heterostracans ate microscopic organisms suspended in the water. This is therefore the current best surmise for how they fed.

Summary:

The Heterostraci make up a diverse and interesting group of Palaeozoic fish that occupy an important position in vertebrate evolution, close to the origin of the mineralized skeleton. Over the past 150 years, we have begun to build up a picture of heterostracan biology. This has enhanced our understanding of Palaeozoic geography and ecology, and informed our knowledge of the evolution of jawed vertebrates. However, we still have much to learn about heterostracan evolution and diversification. For example, how are the tessellated heterostracans related to other groups? We also know little about heterostracan growth and the development of their armoured skeleton. A greater understanding of their skeletal biology may well provide fundamental insights into the earliest experiments in vertebrate skeleton building. Further study and application of new techniques will surely continue to enhance our understanding of these peculiar and fascinating animals.

Acknowledgements:

Joe would like to thank Professor Philip Donoghue and Dr Alain Blieck for their helpful comments and suggestions.

Suggestions for further reading:

Blieck, A. R. M., Karatajute-Talimaa, V. N. & Mark-Kurik, E. 2002. Upper Silurian and Devonian heterostracan pteraspidomorphs (Vertebrata) from Severnaya Zemlya (Russia): a preliminary report with biogeographical and biostratigraphical implications. Geodiversitas 24, 805–820. (http://www.mnhn.fr/publication/geodiv/g02n4a6.pdf)

Halstead, L. B. 1973. The heterostracan fishes. Biological Reviews 48, 279–332. (doi:10.1111/j.1469-185X.1973.tb01005.x)

Janvier, P. 1996. Early vertebrates. Clarendon Press, Oxford. (ISBN:0198540477 9780198540472)

Purnell, M. A. 2002. Feeding in extinct jawless heterostracan fishes and testing scenarios of early vertebrate evolution. Proceedings of the Royal Society of London B 269, 83–88. (doi:10.1098/rspb.2001.1826)

White, E. I. 1973. Form and growth in Belgicaspis (Heterostraci). Palaeontographica Abteilung A 143, 11–24. (http://www.schweizerbart.de/papers/pala/detail/A143/70788/Form_and_growth_in_Belgicaspis_Heterostraci)

http://tolweb.org/Heterostraci/16904Tree of Life Web Project page on the Heterostraci.


1School of Earth Sciences, University of Bristol, Wills Memorial Building, Queen’s Road, Bristol BS8 1RJ, UK.

How to Reference this Article:

Keating, Joseph N. 2013. Fossil Focus: Heterostraci. Palaeontology [online], Volume 3, Article 11, 1-9.